|
Post by banger on Oct 18, 2013 13:07:27 GMT
After installing new cartridges in my HP printer each time after when I switched it on it would print out a test page wasting both paper and costly ink Kimmy sent me the following instructions that was an instant success
Please follow exactly and IN ORDER.
1. Turn off the printer and wait 10 seconds. Turn it on again
2. Let the printer print the test page.
3. After the test page is printed, disconnect the USB cable connecting the printer to your computer. DO NOT turn off the printer while disconnecting the USB cable.
4. Place the test page on the scanner glass and press the SCAN button on the printer. The ON light will flash as the page is being scanned.
5. Remove the test page when the ON light is steady.
6. Finally, turn off the printer and wait another 10 seconds. Then turn it on again. No more printing test pages! Yay!
--------------------------------------------------------
|
|
|
Post by BC on Oct 18, 2013 15:48:24 GMT
Great tip Banger, thanks.
|
|
|
Post by banger on Oct 18, 2013 16:02:50 GMT
The thanks should go to Kimmy
|
|